DC Integra rear sway/tie-bar combo on EG Civic

[civicseth]

Ok, I got a rear sway bar/tie bar kit for a DC Integra for my EG since their suspension is supposed to be interchangeable, but I am having some problems.

The rear sway bar itself looks to be the correct length, but with no LCA's with mounting points, I won't be able to tell as of now. The problem I am having is the mounting points on the rear subframe. My rear subframe has a stepped mounting surface, and this kit has the mounts for a flat mounting surface.

Here are some pictures for reference. I basically need to know what I need to get to get this to work, else I'll just sell it. I know that the rear tie bar won't work at all though because the rear subframe is so different, that it would require a whole new rear subframe bracket, which wouldn't be worth it.


The two vertical holes you see are too narrow and aren't perfectly straight up and down, which won't hold the sway bar.


These holes line up, but obviously won't work.
http://i4.tinypic.com/10p6nmq.jpg
http://i4.tinypic.com/10p6o0k.jpg
http://i4.tinypic.com/10p6pmp.jpg
http://i4.tinypic.com/10p6q06.jpg

[b18ccivics]

first of all that is not how that mounts, second you need another piece and third you need gsr lower control arms or civic si 92-95.

[b18ccivics]

http://www.acuraparts247.com/prddisplay.jsp?inputstate=5&catcgry1=INTEGRA&catcgry2=1995&catcgry3=3DR+GS-R&catcgry4=KA5MT&catcgry5=REAR+LOWER+ARM&ListAll=All&vinsrch=no

parts, 12, 13, 15,17

[b18ccivics]

buy this it is what i have and it rocks
http://www.comptechusa.com/store/140100.html

[civicseth]

first of all that is not how that mounts, second you need another piece and third you need gsr lower control arms or civic si 92-95.
I know. I know. I know. Where can I get the spacers? I plan on getting lower control arms already.

[b18ccivics]

i posted a link, go to your honda dealer, there is part numbers, i know you dont like going to the dealer but that is where you buy them.

[kell211]

what size exhause are you running Kenny? I was going to get the comptech sway bar, but with it being straight, I didn't think it would clear my 3". So I went with ASR, which would be another option for you Seth, if you want to buy a tie bar that will work for your car. And you can use that sway bar with it.

[shawn.hayden]

fat washers are your friend.